Do It Yourself Garage Door Repair
Repairing your garage door can be dangerous. If you read through this article and have any doubts about your garage door repair safety, contact a professional service. It may save you money to do it yourself and you may enjoy learning a new skill. However, the hospital bills due to injuries sustained in the attempt won’t be worth those savings. Above all, educate yourself thoroughly before attempting any do-it-yourself project to be sure you can complete it safely.
What Type of Door are You Dealing With?
Some garage doors swing up in one piece. Some of them ease across the track in sections. Yours could operate with an electric garage door opener or it could be manual. Consider these factors at the beginning of your project. If your garage door operates with an electric opener, the problem could lay there instead of in the door itself. If you’re having a problem with the door running smoothly on the track and it uses panels, there could be an issue with one of the panels instead of the track. Study your garage door. Be completely aware of how it works. Do your best to determine the problem before you begin because it garage door company Herriman Utah could be something simple.
Check for Loose Bolts and Screws
There are mounting brackets and hinges that hold the track to the wall and guide the door along the track. These have bolts and screws that secure everything in place. A loose bolt or screw most likely won’t be obvious, so you’ll have to go through them all to be sure that they are tight. While doing this, it’s also a good idea to give the mounting brackets a good cleaning. If you screw them into dirt, that dirt can lodge itself in between the screws and the brackets and loosen them again.
The Track: A Main Part of Garage Door Repair
The track is the part that guides the door up along the ceiling. The track might have accumulated or hardened grease inside of it that makes the door feel unpleasant as it comes up. It could also be misaligned, which could cause the door to stop midway on its path. Inspect the entire track for grease buildup and clean it as you go. After it is clean, check the track with a level to ensure that no areas are misaligned.
Inspect the Door
You realize that the track is running properly and that all of the hardware is well in place but the door is still not working correctly. If this is the case, your garage door repair problem is likely with the door itself. Inspect the panels, the windows, and all of the edging on the door. The edge is the part that runs along the track, but if there are breaks in the panels that can cause issues as well. If you have wooden doors, the cracks or breaks could probably be fixed with good wood glue. With other materials, you may have to replace the door or one of the panels.